File Install — 6765 Scatter

Installing a scatter file for the MT6765 chipset (commonly found in devices like the Samsung Galaxy A10s, Xiaomi Redmi 9A, or Oppo A5s) is a standard procedure used to flash firmware, remove screen locks, or bypass FRP (Factory Reset Protection). This process typically uses the SP Flash Tool to communicate with the device's bootloader. Prerequisites Before starting, ensure you have the following:

2.2. What is a Scatter File?

A Scatter File (typically named MT6765_Android_scatter.txt) is a plain text configuration file used by the SP Flash Tool. It acts as a roadmap, telling the flashing tool: 6765 scatter file install

MediaTek USB VCOM Drivers: Essential for your PC to communicate with the phone while it's powered off. Installing a scatter file for the MT6765 chipset

Warning: Some custom ROMs or "ported" firmwares may contain a modified scatter file. Always verify the first line: $ddr_map: dram_576M or similar for MT6765. What is a Scatter File

[Revised] How to use SP Flash tool to flash Mediatek firmware

A scatter file is a text document (usually named MT6765_Android_scatter.txt) used by MediaTek flashing software. It contains the memory structure of the device’s NAND or eMMC flash memory. Without it, your computer cannot communicate with the phone’s partitions (like system, recovery, or boot). Prerequisites Before you begin, ensure you have the following:

Note: Some devices require holding a "Boot Key" (usually Volume Up or Volume Down) while plugging in the cable to trigger the VCOM connection. 4. Complete the Process