Adp-160er Schematic Portable -

The ADP-160ER (also known by its Sony part number N16-160P1A) is a 160W–165W internal power supply unit (PSU) used primarily in Sony PlayStation 4 Slim models, specifically the CUH-2115 and CUH-2100 series. Finding an official schematic for this specific board can be difficult because Sony does not release them publicly. However, detailed circuit diagrams and repair data are available through community-driven reverse engineering and technical forums. Core Specifications of the ADP-160ER

Standby Converter: A low-power circuit that remains active as long as the AC cord is plugged in. It typically uses a small transformer and a dedicated PWM controller to provide the +5V standby voltage.

: This community thread acts like a living blog post where experts identify specific components (like the C18 and C19 capacitors) and troubleshoot common failure points. ADP-160ER Repair Video (YouTube) Adp-160er Schematic

The ADP-160ER schematic is used in a wide range of applications, including:

Additional Resources

Reading the Schematic for Common Faults

Now that we understand the architecture, let’s apply the ADP-160ER schematic to real-world repair scenarios.

• [ ] Check AC fuse and MOV.
• [ ] Test bridge rectifier diodes.
• [ ] Measure bulk capacitor voltage (~340V DC).
• [ ] Verify startup resistor and PWM IC VCC.
• [ ] Check gate drive signal on MOSFET.
• [ ] Test output Schottky diodes.
• [ ] Inspect optocoupler and TL431 in feedback loop.

Alternative Compatibility: Techs frequently note that the schematic for the older ADP-160CR model is nearly identical in operating principle and can often be used as a close visual reference if the exact 160ER diagram is hard to find. ⚠️ The Bad The ADP-160ER (also known by its Sony part

Enable / soft-start