Ap3g3-k9w8-tar.153-3.jpo.tar -

This is a request for a feature overview of a specific Cisco IOS access point image file.

ap# archive download-sw /overwrite tftp://<server-ip>/ap3g3-k9w8-tar.153-3.jpo.tar

If an access point is stuck or needs a manual update, you can use the following command from the AP's CLI to download and install the software: Ap3g3-k9w8-tar.153-3.jpo.tar

Stability: Fixes for memory leaks and radio resets found in earlier 15.2 releases. This is a request for a feature overview

This file is primarily used by network administrators in two scenarios: Software Upgrades If an access point is stuck or needs

• WLC > Wireless > Access Points > All APs > select AP > Firmware Upgrade > upload this tar file.
• WLC pushes via CAPWAP image predownload (avoids tftp to each AP).

: If a 3802i or similar AP cannot reach the controller or fails its join request, administrators use this image to manually reflash the firmware via TFTP. Manual Upgrades : It is used in the archive download-sw command to manually push code to the AP from a server. Corrupted Flash