Becsys5 Installation And Technical Manual 〈FREE〉

is a high-performance water chemistry controller designed for commercial aquatic facilities like pools, spas, and water parks. Managing it effectively requires a solid understanding of both its physical installation and the technical logic that keeps your water crystal clear. Key Installation Requirements

Appendix B: Default Settings

| Setting | Value | |---------|-------| | Username / Password | admin / admin (change immediately) | | ETH0 IP | DHCP | | SSH | Enabled (port 22) | | Timezone | UTC | | PLC cycle time | 100 ms | | Log retention | 90 days | becsys5 installation and technical manual

4.3 Installing I/O Modules

  1. Remove backplane covers.
  2. Align module with slot guide.
  3. Press firmly until ejector latches click.
  4. Secure with two screws (0.5 Nm).
  5. Label each slot (e.g., "Slot 2: AI8-U, Chillers").
  1. Apply 0V (or 4mA) → read raw value → set as "Low Cal".
  2. Apply 10V (or 20mA) → read raw value → set as "High Cal".
  3. Save. Linear scaling applied automatically.

4.2 Defining I/O and Tags

In the Hardware Configuration tree: