Biosystems Bts 350 User Manual ^hot^ -

Table of Contents

: The system can store the last 31 results for each test and generate Levey-Jennings charts Westgard rules for monitoring precision. Medical EXPO Essential Maintenance Tips Cleaning the Flow Cell biosystems bts 350 user manual

It is highly likely you are looking for the Biosystems BTE 350 manual. If "BTS" is a typo, here is the good piece of information you need. Table of Contents : The system can store

Safety and Compliance

• Only trained personnel should operate the BTS 350.
• Use appropriate PPE: lab coat, gloves, eye protection.
• Handle biological samples and reagents as potentially infectious; follow biosafety level 2 practices.
• Dispose of biohazard waste, sharps, and chemical waste per local regulations.
• Ensure electrical grounding and avoid liquids near power connections.
• Calibrate and verify performance before clinical use; run quality controls daily or per lab SOPs.

"Low Signal": Usually indicates a dirty flow cell or a failing LED. Try an intensive cleaning cycle first. Only trained personnel should operate the BTS 350

Before running your first test, ensure the unit is placed on a level, vibration-free surface away from direct sunlight.

• Turn off the gas. Remove the cup.
• The unit will save the settings and return to normal monitoring mode.

1. Attach the sample wand and hose to the inlet port.
2. Activate the pump function (usually a dedicated button or automatic upon startup).
3. Check for flow: Listen for the motor whir. If the unit alarms immediately with a "Flow Fault" or "Pump Error," check for blockages in the hose or water in the filter.