C3560ipservicesk9mz1502se11bin Upd [patched]

Introduction

Upgrade to SE11 if:

You need to patch CVE-2018-0156 (Smart Install) for compliance.
You are running 12.2(55)SE or earlier and need IPv6 or OSPFv3 stability.
You have recently purchased refurbished 3560s and want a clean baseline.

archive download-sw tftp:///c3560-ipservicesk9-tar.150-2.SE11.tar Manual Booting : If you only have the c3560ipservicesk9mz1502se11bin upd

: This identifies the hardware platform. The 3560 series is a line of fixed-configuration, enterprise-class switches designed for branch offices or small-to-medium business core layers. ipservicesk9 Introduction Upgrade to SE11 if:

capabilities, including advanced protocols like BGP, EIGRP, and OSPF, as well as advanced Quality of Service (QoS) and security features. The "k9" indicates it includes strong payload encryption (standard for modern Cisco IOS). : This indicates the file runs in RAM ( ) and is compressed ( 150-2.SE11 : This is the versioning. It denotes IOS Version 15.0(2)SE11 You need to patch CVE-2018-0156 (Smart Install) for

This article covers what this specific image offers and how to safely perform the upgrade. What is this Image? Hardware: Cisco Catalyst 3560 (Non-E/G/X models).

6.2 "No bootable image found" after reload

Symptom: Switch loops into switch: prompt (ROMmon).
Fix: At ROMmon, run:

configure terminal
no boot system
boot system flash:c3560-ipservicesk9-mz.150-2.SE11.bin
end
delete flash:c3560-xxx-old-image.bin

The c3560ipservicesk9mz1502se11.bin is a software image file for Cisco Catalyst 3560 series switches. This guide provides step-by-step instructions on how to update your Cisco Catalyst 3560 switch to this software version.