Caraflo V200 Shower Instructions -

Caraflo V200 is a thermostatic shower mixer valve primarily used in static caravans and holiday homes

Installation Steps

Step 4: The Quarter-Turn Rule

Once hand-tight, use a soft-jawed plumber’s wrench to tighten exactly one quarter (1/4) turn further. Many users overtighten, crushing the rubber washer inside, leading to leaks or a stuck swivel. caraflo v200 shower instructions

• Valve body must be installed horizontally with hot water supply on the left (viewed from front).
• Depth: finished wall surface should align with valve’s cover plate range (typically 25–35mm from tile face).

• Tighten plumbing connections; replace worn seals or inlet filters.
• If internal leak suspected, switch off and call service.

(92mm length, 31.45mm diameter) may need replacement or descaling. Use silicone grease Caraflo V200 is a thermostatic shower mixer valve

The Caraflo V200 is a thermostatic shower mixer valve specifically designed for static caravans and holiday homes. Since its introduction in 2013, it has become a standard fitting in many holiday home brands, including Swift, Willerby, ABI, and Victory. Installation Instructions Valve body must be installed horizontally with hot

operates with dual-control functionality to ensure a consistent and safe showering experience: