DIN EN 60352-2 (equivalent to IEC 60352-2) is an international/European standard that specifies methods for making and testing permanent electrical connections by soldering — specifically it addresses soldered connections for electrical and electronic assemblies. Part 2 focuses on test methods and requirements for soldered joints (as opposed to general application rules, which may appear in other parts or related standards). The standard defines the mechanical and electrical performance criteria, test procedures, specimen preparation, environmental and mechanical conditioning, and acceptance limits used to verify the reliability of soldered joints.
In the fluorescent-lit silence of the validation lab, Elara tightened the torque wrench one last time. The connector clicked into place. On her screen glowed the standard: DIN EN 60352-2:2006-11. din en 60352-2 pdf
Tensile Strength: Defines minimum pull-out forces based on wire cross-section to ensure mechanical durability. DIN EN 60352-2 — Overview and detailed discourse
Industrial, automotive, and telecommunication electrical systems automotive wire harnesses
“Transient fault,” muttered the electronics technician, Kai. “Ground loop? Cold solder joint?”
: Testing for durability against vibration, temperature cycling, and corrosive atmospheres. Application Guidance
Industries: It is widely used in telecommunications, automotive wire harnesses, and industrial electronic devices. 2. Current Editions and Updates