Introduction
Power Connection: Plug the provided power adapter into the DC input (typically 9-12V) and turn on the power switch. disco 240 dmx controller manual
Congratulations on purchasing the Disco 240 DMX Controller, a professional-grade lighting controller designed to make your lighting design and operation a breeze. This manual will guide you through the features, installation, and operation of your new Disco 240 DMX Controller. Introduction Power Connection : Plug the provided power
If your moving head uses only 16 channels, set its DMX address to 001. Fixture 2 should be at 017, not 025 (01 + 16 = 17). The controller will send "empty" data on unused faders, but that is fine because the fixture ignores channels beyond its profile. Chapter 8: Advanced Tips Not in the Original Manual A
Select Chase: While in Program mode, press a CHASE button (1–6).