Fix Generator V 1 1 Samsung Scx 3405 |link| [360p]

Quick steps to clear a complete paper jam in a Samsung SCX-3405 (Gen. v1.1)

1. Turn off and unplug the printer; let it cool ~5 minutes.
2. Open the front cover (toner access). Carefully remove the toner cartridge and set it on a clean, protected surface.
3. Remove visible paper from the toner area by pulling slowly and evenly with both hands in the direction of paper feeding (do not tear).
4. Open the rear cover / duplex tray (if present). Pull out any jammed sheets from the back toward the exit path—again, steady even force.
5. Check the paper tray: remove the input tray and any loose or wrinkled sheets; fan the stack and align edges before reinserting.
6. Inspect the fuser area and rollers: with the toner out and rear cover open, look for small scraps stuck around rollers or the fuser. Remove gently—avoid touching the fuser surface (it’s hot/delicate).
7. Rotate feed rollers manually (if accessible) to clear trapped bits; use a flashlight to spot tiny pieces.
8. Reinstall toner and trays, close all covers firmly.
9. Plug in and power on, then print a test page.

Summary Checklist for Users

If you are looking to fix your Samsung SCX-3405:

Generate the File: Enter the Serial Number, Firmware Version, and CRUM into the generator to create two files: a downloader (usbprns2.exe) and the fix firmware (.hd or .fls file). fix generator v 1 1 samsung scx 3405

• The Goal: The primary goal is to convert the printer into a "never lock" state. This means the printer will stop counting toner pages, allowing you to refill your original toner cartridges indefinitely without buying new chips.
• The Risk: If the flashing process is interrupted or the wrong firmware version is used, the printer can become "bricked" (unusable).