To set up your Gprinter GP-U80160 series (often referred to as the NCUT series), follow these steps to install the driver and configure the hardware. 1. Download and Install Software Download the Driver : Get the official GP-80mm Receipt Printer Driver Gprinter Download Center : Locate the downloaded file (e.g., Driver_Install_Receipt_Label_CN.exe ) and run the installer. Select Model : Choose the series from the printer list during the wizard. Assign Port : Select the correct connection port (usually for USB connections or the appropriate COM/LPT port). 2. Physical Connection Cable Setup
Speed: Delivers solid efficiency with printing speeds ranging from 160mm/sec to 170mm/sec. gp80160 ncut series driver full
It looks like you’re referencing a report or document titled "gp80160 ncut series driver full" — possibly related to a hardware driver, embedded system, or industrial control component. To set up your Gprinter GP-U80160 series (often
Do not try to install directly from the compressed folder. Right-click the downloaded file and select Extract All. This ensures the installer can access all necessary configuration files during the process. Select Model : Choose the series from the
Connect Hardware: Plug your printer into a power source and connect the USB (or relevant) cable to your computer.
Enable Auto-Cutter: Once installed, go to Control Panel > Devices and Printers. Right-click your printer, select Printer Properties, and under the Device Settings tab, ensure the Paper Cut or Cutter option is set to "Report End" or "Document End." 4. Troubleshooting Common Issues