Hewlett-packard 18e7 Motherboard Specs !!top!! | Newest & Legit

The Hewlett-Packard 18E7 motherboard is a proprietary board primarily found in the HP ProDesk 600 G1 Tower (TWR) business desktops. Built on the Intel H87 chipset, it was a staple of HP’s 4th-generation Intel "Haswell" business lineup, offering a balance of stability and office-focused performance. Core Technical Specifications Specification Details Chipset Intel H87 Express CPU Socket Form Factor Micro-ATX (Proprietary HP Design) Memory 4x DDR3 DIMM slots; Supports Dual Channel Max RAM Up to 32 GB (4x 8GB modules) Memory Speed DDR3-1600 / 1333 MHz Expansion Slots 1x PCIe x16 (Gen 3.0), 3x PCIe x1 Storage 4x SATA III (6.0 Gb/s) ports Processor Compatibility

Socket: BGA (Ball Grid Array). The processor is soldered directly to the motherboard and is not user-upgradeable. hewlett-packard 18e7 motherboard specs

6. Video Output (Integrated)

CPU dependent: Intel HD Graphics 530 (Skylake) or HD 630 (Kaby Lake)
Internal display connector: 30-pin LVDS or eDP (for built-in AIO screen)
External outputs on back I/O: 1 x DisplayPort 1.2, 1 x VGA (optional)

Important Note: The 18E7 is a proprietary motherboard designed specifically for HP All-in-One (AIO) PCs (e.g., HP EliteOne 800 G2/G3 series). It is not a standard retail motherboard (like an ATX or Micro-ATX) and cannot be used in standard PC cases without heavy modification. The Hewlett-Packard 18E7 motherboard is a proprietary board

Peripheral Specifications:

TDP Limit: The VRM (voltage regulator module) on the 18E7 is designed for 65W CPUs. Using a 95W or 125W chip (e.g., i9-9900K) will cause thermal throttling and potential shutdowns. If you upgrade to an i7-9700 (65W), you are safe.
BIOS Version Required: To run a 9th Gen CPU, your BIOS must be version 2.20 or higher. Update from HP Support Assistant before swapping chips.