Nalco 8506 Plus Msds | Recent & Proven
The safety and technical profile of Nalco 8506 Plus (also known as NALCO® 8506 PLUS) identifies it as a liquid biodetergent used primarily for microbiological control in industrial cooling systems Chemical Composition & Hazards Based on its Safety Data Sheet (SDS) , the product contains: Alcohols, C12-15, ethoxylated (10–30% concentration): A surfactant. Sodium Xylenesulfonate (5–10% concentration): Used as a hydrotrope. Key Hazards:
8. Exposure Controls and Personal Protection (PPE)
- Respiratory Protection: If engineering controls (ventilation) are not sufficient to maintain exposure below occupational exposure limits, use a NIOSH-approved respirator with an organic vapor cartridge or a supplied-air respirator.
- Eye Protection: Chemical safety goggles are mandatory. A face shield is recommended when handling open containers or during transfer operations.
- Skin Protection: Wear chemical-resistant gloves (typically Nitrile, Butyl, or Neoprene depending on the exact solvent concentration). Wear long-sleeved shirts and long pants, or a full chemical suit for heavy exposure risk.
- Hygiene: Emergency eyewash stations and safety showers must be accessible in the immediate work area.
1. Hazard Identification
NALCO 8506 Plus is generally classified as a moderate irritant. According to most available SDS versions: nalco 8506 plus msds
Section 1: Product Identification & Manufacturer Information
Before diving into hazards, the SDS establishes exactly what the product is and who to contact in an emergency. The safety and technical profile of Nalco 8506
- Classification: Corrosive to metals, skin corrosion/irritation, serious eye damage/eye irritation
- Label Elements: Warning, corrosive to metals, causes skin irritation, causes serious eye irritation
- Hazards Not Otherwise Classified: May cause respiratory irritation
Storage Guidelines
- Keep container tightly closed when not in use.
- Store in a cool, dry, well-ventilated area, away from direct sunlight and heat sources.
- Incompatible Materials: Strong bases (caustic soda, amines), oxidizers (bleach, chlorinated compounds), and reactive metals (aluminum, zinc, galvanized steel) – the acid will corrode these metals, producing hydrogen gas (flammable).
- Storage temperature: 40°F to 100°F (4°C – 38°C). Avoid freezing. If frozen, thaw at room temperature and mix thoroughly before use (the product is freeze-thaw stable but may stratify).