Nokia 130 Rm-1035 Usb Driver

To connect a Nokia 130 (RM-1035) to your PC for data transfer, charging, or firmware flashing, you typically need the Nokia Connectivity Cable Driver or specific MTK (MediaTek) , as this model uses a MediaTek chipset. 1. Key Driver Information Official Driver Name: Nokia Connectivity Cable Driver. Hardware ID: USB\VID_0421&PID_069A USB\VID_0421&PID_06FB Compatibility: Windows XP, 7, 8, 10, and 11 (32-bit & 64-bit). 2. Where to Get the Drivers

Issue 2: Driver Installation Fails on Windows 11 (Unsigned Driver)

Cause: Windows 11 blocks unsigned legacy drivers by default.

Keypad Light Blinking Issue: Often a firmware issue requiring the driver and a flashing tool, as noted in flashing tutorials for this model. nokia 130 rm-1035 usb driver

Nokia 130 RM-1035 USB Driver: Why You Need It and How to Install It

The Nokia 130 (model number RM-1035) is a classic feature phone known for its legendary battery life and durability. While it runs on the Series 30+ operating system (not Android or Windows), you might still need to connect it to a computer.

Download the Nokia_Connectivity_Cable_Driver or Nokia_MTK_USB_Driver setup file. Right-click the setup file and select Run as Administrator. To connect a Nokia 130 (RM-1035) to your

The Nokia 130 does not use a modern smartphone operating system like Android or iOS. Instead, it runs on the Series 30+ platform. Without the specific USB driver installed on your Windows computer, the PC will fail to recognize the device when plugged in via a micro-USB cable. Installing the driver enables several key functions:

Step 3: Manual Installation via Device Manager

  1. Turn off your Nokia 130.
  2. Open Device Manager on your PC (Right-click Start button > Device Manager).
  3. Connect the Nokia 130 to your PC via USB cable while holding the "Download" key (usually the volume down button or the "C" button – consult your flashing guide).
  4. The PC will detect an unknown device as "Nokia USB ROM" or "Nokia BB5".
  5. Right-click the unknown device > Update driver > Browse my computer.
  6. Click Let me pick from a list of available drivers.
  7. Click Have Disk > Browse to the extracted driver folder (e.g., usb_driver\win7_x64).
  8. Select "Nokia USB Generic" and click Next.
  9. Ignore the "unsigned driver" warning and install.

Installation Instructions:

Feature Profile: Nokia 130 RM-1035 USB Driver

📋 Overview

The Nokia 130 (RM-1035) is a feature phone. Unlike smartphones (Android/iOS), it does not require a complex PC Suite for basic file transfers. However, it requires a specific Media Transfer Protocol (MTP) Driver or Nokia Connectivity Driver to communicate effectively with a Windows computer.