Resetter Epson L1250

The Epson L1250 Resetter (also known as the Adjustment Program or AdjProg) is specialized software used to clear "Service Required" errors, primarily when the internal Waste Ink Pad Counter reaches its limit. Key Features of the Adjustment Program

(Wi-Fi resetting is generally not supported for this method). AdjProg.exe file, click , and choose from the model list. Ensure the correct Port is selected. Reset Steps Particular Adjustment Mode Waste ink pad counter Check the boxes for Main Pad Counter Platen Pad Counter to see current usage, then click Initialize to clear it. : Turn the printer again when prompted to complete the cycle. Method 2: Using WIC Reset Utility This is a more user-friendly, third-party software option. : You can download the tool from sites like : Unlike the Adjustment Program, WIC usually requires a paid Reset Key for a 100% reset. Resetter Epson L1250

The Big Reset:Keep those boxes checked and click Initialize. A pop-up will ask for confirmation; click OK. The Epson L1250 Resetter (also known as the

Using the Epson L1250 Resetter requires some technical knowledge and caution. Here's a step-by-step guide: Turn on the printer

Step-by-Step: Reset Epson L1250 Waste Ink Counter

Step 1: Prepare the Printer

Turn on the printer.
Make sure it has paper loaded (not always necessary, but good practice).
Connect the printer to your PC via USB.
If the printer shows the error screen, it’s ready for reset.

Turn off the printer.
Hold the “Stop” + “Power” buttons.
Release Power but hold Stop for 5 seconds.
Release Stop. Press “Stop” 4 times.
If the lights behave differently, you are in service mode. But without the official Epson Adjustment Program, you cannot reset.

Turn off the printer using the power button.
Disconnect the printer from any network (Wi-Fi/Ethernet).
Connect the printer directly to the PC via USB. (Do not use a USB hub.)
Put the printer into Service Mode (see Section 5).

Physical Hardware: Resetting the software does not physically clean the ink pads. If the pads are physically saturated, ink may eventually leak out. It is recommended to replace or clean the sponges if they are full.

Disclaimer: Modifying your printer’s waste system and using third-party reset tools voids your manufacturer warranty. Proceed at your own risk. The author is not responsible for ink leaks or printer damage.