Sc673-10 Ricoh Error -
Ricoh error code SC673-10 indicates a communication failure between the Smart Operation Panel and the main controller, often resulting from disabled SP settings or controller malfunctions. Recommended solutions include power cycling the device, verifying the OpePanel connection setting in Service Mode (SP5-748-201), and inspecting hardware components. Find detailed troubleshooting steps at
Fix A: Update or Reinstall System Firmware (D087 or D0BN)
Tools: 2GB or smaller SD card (FAT16/FAT32 formatted), Ricoh Firmware Package. sc673-10 ricoh error
4. Controller Board Failure
A failing controller board (motherboard) can have damaged communication ports (LVDS or USB signal lines). This is rarer but happens after a power surge. Ricoh error code SC673-10 indicates a communication failure
Troubleshooting Steps
-
If the machine was recently moved or serviced, a cable may have shifted. If the machine was recently moved or serviced,
John rushed back to his desk and started searching for the firmware update. He found it on Ricoh's website and applied it to the printer. The machine whirred and beeped as it updated its software.
SOP Unit: The Smart Operation Panel itself may have a faulty communication module. Summary Table: SC673-10 Breakdown Error Type Pattern D (Service Call) Primary Meaning Flair communication error between Panel and Controller First Action Turn main switch OFF then ON Key SP Code SP5-748-201 (Must be set to 1) Common Hardware Fix Reseat or replace the SOP USB/harness
The copier, a Ricoh SP C352DN, was beeping loudly and flashing an error message on its screen: "SC673-10". John had seen this error code before, but it was rare and always seemed to appear at the most inopportune moments.