Xtra Safe Kt 82001 Manual May 2026

The Xtra Safe KT 82001 (often stylized as X-tra Safe or Xtra-Safe) is a high-security lockbox designed for keys or small valuables. This model is commonly used for real estate listings, property rentals, and construction sites.

  • Before each use: Visual inspection (webbing, hooks, ratchet teeth)
  • Weekly (if used daily): Clean with mild soap and water. Do not use degreasers on webbing.
  • Monthly: Lubricate ratchet pivot points with dry graphite lubricant.
  • Annually: Load test to 100% of WLL using a calibrated pull scale. Log results in a maintenance ledger.
  • Every 2 years (or after heavy use): Replace the webbing even if no visible damage. Polyester weakens microscopically.

Open: While holding the key in the unlocked position, rotate the knob or handle clockwise and pull the door open. 2. Battery Installation Xtra Safe Kt 82001 Manual

  • Maintenance Schedule: A recommended schedule for routine checks and maintenance tasks.
  • Troubleshooting Guide: A list of common issues, their possible causes, and step-by-step solutions.

Press the "#" or "*" (or "Enter") key to confirm. A green light or double beep typically signifies a successful change. Security and Troubleshooting How to Reset Electronic Door Lock Without Code The Xtra Safe KT 82001 (often stylized as

4. Usage and Operation

The KT-82001 features a unique "Quick Release" mechanism (often a lever or specific shape) designed to prevent the firearm from being snagged or difficult to remove in an emergency. Before each use: Visual inspection (webbing, hooks, ratchet

  1. Placement: Place the firearm (slide, barrel, or frame) against the rubberized magnet surface. The rubber protects the gun's finish from scratches.
  2. Retention: The magnet will engage immediately. Test the hold by gently shaking the surface the magnet is mounted to.
  3. Retrieval: To remove the item, do not pull straight out aggressively. Utilize the quick-release leverage point (usually by tilting the item or using a thumb leverage motion) to break the magnetic seal smoothly.

Secure: Reposition the safe, insert the heavy-duty bolts through the safe floor/wall into the drilled holes, and tighten securely. ❓ Troubleshooting Guide Keypad does not respond or beeps weakly Cause: The batteries are low or dead.